S5720-30TXP
S5720-30TXP
S5720-30TXP
S5720-30TXP
S5720-30TXP
S5720-30TXP
S5720-30TXP
S5720-30TXP

S5720-30TXP  

24-port 2.5G PoE Switch with 6*10G uplink

  • 24 x 100M/1000M/2.5G Base-T port
  • 6 x 10G BASE-X SFP+ port
  • Dual AC power supply(optional) and smart fans
  • IEEE 802.3af/at compliance
  • QinQ, OSPF, LAG, MSTP
  • 1U Rack-mount design

Thanks a lot for your inquiry and we will handle it as early as possible.

S5720-30TXP   Overview

The S5720 series switch is a layer3 2.5Gig Ethernet switch, which can meet the needs of cost-effective 2.5G access and 10 Gigabit uplink for enterprise networks and operator customers. S5720 uses a high-performance low-power network processor, provides Gigabit line-speed forwarding performance, supports green Ethernet line sleep capability, has the lowest power consumption of the same-level equipment in the industry, supports powerful QoS and ACL functions, and supports IP+MAC+ Security features such as port binding support service flow classification and packet priority marking. Support static data packet sampling, SFLOW function, support multi-port mirroring analysis function, support static and flexible QinQ function, support Ethernet OAM 802.3ag (CFM), 802.3ah (EFM), support strategy-based IPV4/6 unicast routing, support Flexible forwarding strategy

Simple and easy-to-use network management function

Support CLI based on RS232 serial port, Telnet and SSHv2
Support WEB-based configure operation management, support SNMP V1/V2/V3
Support remote upgrade or equipment through FTP and TFTP

Full QoS policy and Q-in-Q for campus or carrier network

The switch fully implements the DIFFSERV model, provides up to 8 QoS queues, supports DSCP/TOS/802.1P and other QoS methods, SP, SRR, WRR, WFQ and hybrid scheduling and other priority queue scheduling algorithms, which can achieve port speed limit QoS functions such as traffic shaping to meet customer network requirements for data processing priority; support port trust, configurable trust CoS, DSCP, IP priority, port priority, and modify the DSCP and CoS values of data packets; according to the port , VLAN, DSCP, IP priority, ACL table to classify the traffic, modify the DSCP and IP priority of the data packet, and specify different bandwidths to provide different service quality for voice/data/video transmission in the same network. Support QinQ function, encapsulate the user's private network VLAN tag in the public network VLAN tag, so that the message will pass through the backbone network with
two layers of VLAN tag to realize the intercommunication of the user's private network.

Enhanced security and authentication technologies

Provides multiple security policies such as user authority/identity authentication, port security, port speed limit, port monitoring, address filtering, loopback detection, 802.1X authentication etc., to provide multiple protection mechanisms for user access and network security. It has a very good security function design, supports user security policy-based SNMP V3, MAC+IP+VLAN binding, 802.1X authentication and other security strategies, supports anti-
network storm attacks, anti-DOS/DDOS attacks, anti-ARP attacks, Security technologies such as anti-network protocol message attacks can effectively prevent attacks and viruses, and are more suitable for large-scale, multi-service, and complex traffic access networks

Layer3 routing and enhanced multi-service

Support static route
Support dynamic route such as RIP, OSPF,BGP, IS-IS
Support IPV4/IPV6 dual protocol stack,Support RIPng、OSPFv3
Support DHCP Server and DHCP Relay,L2-Tunnel
Support Ethernet OAM protocol such as CFM、EFM

S5720-30TXP   Specification

                   Model

S5720-30TX

S5720-30TXP

Port

24*100/1000M/2.5G Base-T RJ45
6*1000M Base-X SFP/10G SFP+

24*10/100/1000M/2.5G Base-T POE RJ45
6*1000M Base-X SFP/10G SFP+

Chipset

Realtek 9313

Realtek 9313

Switching capacity

240Gbps

240Gbps

forwarding rate

160Mbps

160Mbps

MAC

32K

32K

Multicast

4K

4K

ARP table

8K

8K

Route table

12k

12k

PoE port

/

1~24 port (IEEE 802.3af/at)

PoE budget

/

400W

Flash

32MB

32MB

DDR Memory

512MB

512MB

Power supply

AC 100240V 47/63Hz

DC 36V75V

AC 100240V 47/63Hz

DC 36V75V

Power consumption

≤39W

≤450W

Dimensions
WxDxH

440×260×44mm

440×260×44mm

Working Temperature

-10℃~55

-10℃~55

Storge temperature

-40℃~70

-40℃~70

Software

Ethernet

Ethernet interface operating modes(full duplex, half duplex, and auto-negotiation)

Ethernet interface operating rates

Jumbo Frame

Port enable/disable

Flow-control tx/rx

Port based storm-control

Unknow-unicast/unknow-multicast/broadcast storm-control

Port-isolate

Cut-through

VLAN

Access/Trunk/Hybrid

4K VLAN

Default VLAN

VLAN Classification(port based/mac based/ip based/protocal based)

Basic QinQ

Flexible QinQ

VLAN Swap

MAC

Automatic learning and aging of MAC addresses

Hardware Learning

Static and dynamic  MAC address entries

blackhole MAC

LAG

Static-LAG & LACP

LAG load balanceSIP/DIP/SMAC/DMAC

STP

Spanning-Tree Protocol

Rapid Spanning-Tree Protocol

Multi-instance Spanning-Tree Protocol

BPDU Filter/Guard

Root Guard

Loop Guard

ERPS

Single Ring

Sub Ring

Loopback Detect

Loopback-detection

Layer2 Multicast

IGMPv1/v2/v3 Snooping

Fast leave

Static IGMP snooping group

MVRMulticast VLAN Registration

ARP

Static and dynamic ARP entries

Aging of ARP entries

Gratuitous ARP

basic ARP-Proxy

local ARP-Proxy

IPv4 Unicast Routing

IPv4 Static Routes

uRPF check

RIPv1/v2

OSPFv2

IS-IS

BGP

ICMP redirect

ICMP unreachables

ECMP

IPv4 Multicast Routing

IGMPv1/v2/v3

IGMP-Proxy

IGMP SSM Mapping

PIM-SM

PIM-SSM

PIM-DM

IPv6 Basic Protocol

ICMPv6

NDP

PMTU

IPv6 Unicast Routing

IPv6 Static Routes

RIPng

BGP4+

OSPFv3

IS-IS

IPv6 Multicast Routing

MLD v1/v2

MLD v1/v2 Snooping

BFD

BFD for OSPFv2

VRRP

VRRP

Track for VRRP

Smart Link

FlexLink

Monitorlink

EFM

Auto detection

Network fault detetion

Network fault handle

remote loopback

CFM

Hardware CCM detect

MAC Ping

MAC Trace

Y.1731

Latency and jitter measure

QoS

Traffic classification based on COS/DSCP (simple classification)

Traffic classification based on ACL ( complex classification)

Traffic classification based on inner header of the tunnel packets

Queue scheduling

Remark the priority fields(COS/DSCP) of the packet based on ACL

Flow redirection

Flow mirror

Traffic policing based on direction(in/out)  of Port

Traffic policing based on direction(in/out) of VLAN

Traffic policing based on direction(in/out) of flow

Traffic policing based on direction(in/out) of aggregated flow

Queue based traffic shaping

Port based traffic shaping

SPStrict Priorityscheduling

WRRWeighted Round Robinscheduling

SP + WRR mixed scheduling

Packet counts and bytes statistics based on traffic classification

Packet counts and bytes statistics based on the color after traffic policing

Forwarded and discarded packet counts and bytes statistics

System Security

SSHv1/v2

RADIUS

TACACS+

Authentication

Accounting

Port based dot1x

MAC based dot1x

MAC/IP ACL

Basic Mode ACL

Port/VLAN/L4-Port ACL

Time Range

ARP Inspection

IP Source Guard

Limitation on MAC address learning on interface

Limitation on MAC address learning on VLAN

Rate limit

CPU Traffic Limit

Prevent DDOS attack (ICMP Flood/Smurf/Fraggle/LAND/SYN Flood)

CLI/WEB/SNMP/Telnet/SSH filtering

Network Management

DHCP Server

DHCP Relay

DHCP Snooping

DHCP Option60

DHCP Option82

RMON

RFC3176 sFlow

SNTPSimple Network Time Protocol

LLDP

Terminal Services

Configurations through CLI (Command Line Interface)

Vty Terminal service

Console Terminal service

Configuration Management

Inband management interface and configuration

Outband management interface and configuration

privileged user proirity and privileged commands

Network management based on SNMPv1/v2c/v3

Public and private MIB

Public and private Trap

Configuration and management based on WEB

Restore factory default configuration

File System

File system

Upload and download files through FTP or TFTP

Upload and download files through Xmodem

Debugging And Maintenance

per-module Debug features

ICMP Debug

CPU usage display and  alarm

Memory  usage display and  alarm

Device temperaturePSUFANstatus display and alarm

User operation logs

Management of logs, alarms, and debugging information

VCTVirtual Cable Test

Detailed Diagnostic-information collection

Manual reboot

Schedule Reboot

Reboot Information logging

Ping

IPv6 Ping

Traceroute

Port mirror

Flow mirror

Remote mirror

Multi-destination mirrorm:n

To CPU/From CPU packets statistics

port loopback

hardware loopbackinternal/external

Time configuration

Timezone

Upgrade

upgrade with the local image file

upgrade with the remote TFTP server

Online upgrade Uboot

Relevant Products

G06P4G1TS

G06P4G1TS

S6348-4X2Q-SI

S6348-4X2Q-SI

PSE90W-GS

PSE90W-GS