DC input Outdoor waterproof 802.3bt 90w POE injector-POEPlus - Built Green Networks-30/60/90w industrial DC input POE injector & industrial POE splitter

PSE95W-OT-DC Overview

PSE95W-OT-DC is an outdoor DC input POE injector comply with 802.3bt standard max up to 90w output， specially designed for exterior, complex back-haul and networking applications. Enclosed in an IP67 Reflective Aluminum case with a sealing that gasket passes tension, bearing, corrosion, and aging test for IP67 applications. The data rates is at 10/100/1000Mbps. The single output port delivers 55V,1.75A power via 4 pairs for remote PD with 6KV (10/700us) surge protection. It works with input voltage of 12- 55Vdc makes it possible for solar application. The output voltage is a fixed one at 55V. Wide temperature extend to -40℃ to +65℃. The output port equipped detecting chip which is compliant with IEEE802.3af/ at/PoE++ can power up wireless APs, IP cameras, Microwave radio, base stations and other high power Ethernet backhaul devices. For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. Easily to install with mounting holes, no need to open the equipment. With Stainless Steel Cable ties can be fixed on a Pole.

PSE95W-OT-DC Specification

Specification

Standard

- IEEE802.3 10Base-T Ethernet

- IEEE802.3u 100Base-Tx Fast Ethernet

- IEEE802.3ab 1000Base-T Gigabit Ethernet

- Support terminal equipment with IEEE802.3af/at/PoE++

- RoHS Compliance

- WEEE Compliance

Input & Output

- Input :12-55Vdc 10.0A

- Output: 55Vdc 1750mA

- Power Output Pins: 4/5(+), 7/8(-) and 3/6(+), 1/2(-)

- Data Speed: 10/100/1000Mbps

Working Environment

- Operating Temperature: -40℃ to 65℃

- Operating Humidity: 20% to 80%, non-condensation

- Storage Temperature: -40℃ to 85℃

- Storage Humidity: 10% to 95%, non-condensation

- Operating Altitude: up to 5000meters

PoE Surge Protection

- Protected line: 1,2,3,4,5,6,7,8

- Common mode surge protection(10/700us): 6KV

- Differential mode surge protection (10/700us): 1.5KV

EMI

- FCC CFR47 Part 15, EN55032, EN55035

EMS

- IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air)

- IEC61000-4-3(RS) 10V/m(80MHz~2GHz)

- IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV

- IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM

- IEC61000-4-6(CS) 10V(150kHz~80MHz)

Immunity

- IEC60068-2-6(Vibration)

- IEC60068-2-27(Impact)

- IEC60068-2-32(Free Fall)

Mechanical Characteristics

- Case: Aluminum

- Color: White

- Mounting: Wall-mounted/Pole-mounted

- IP Rated: IP67

- Size: 187mm X 104.79mm X 45mm

- Weight: 565g

PSE95W-OT-DC

DC input Outdoor waterproof 802.3bt 90w POE injector

Thanks a lot for your inquiry and we will handle it as early as possible.

PSE95W-OT-DC Overview

PSE95W-OT-DC Specification