Specification

Product Information

Product Model

S2528C-P-400W

Hardware specifications

Fixed Ports

24*10/100/1000 Base-T ports(POE/POE+)

4*10/100/1000 Base-T ports

4* 1000 Base-X SFP ports(Combo)

Consloe

1

Reset

1

Max Output Power(single port)

30W

Total Power Consumption

400W

PoE Pin-out

1/2(+),3/6(-)

Switching capacity

52Gbps  

Forwarding Rate

39Mpps

Flash/RAM

16MB/128MB

Temperature

Operating temperature: (-10 - 50)°C

Storage temperature: (-40 - 70)°C

Humidity

Operating humidity: (10% - 90%) RH, non-condensing

Storage humidity: (5% - 90%) % RH, non-condensing

Dimensions(L*W*H)

440(L)*285(W)*44.5(H)mm

Power

AC:100240VAC,5060Hz

Power consumption

400W output the whole device

Weight

<6Kg

Lightning protection

6KV

MAC address table

8K

LED Indicator

Power,System ,Link/Act,POE

Software specifications

Forwarding mode

Store-and-forward

Protocol and Standards

IEEE 802.3, 10 Base-T Ethernet;

IEEE 802.3u,100 BASE-TX;

IEEE 802.3ab,1000 BASE-T;

IEEE 802.3z,1000 BASE-X;

IEEE 802.3az,EEE(Energy Efficient Ethernet);

IEEE 802.3af

IEEE 802.3at

MAC Address Table

Up to 8K MAC addresses

Support auto-update, two-way learning

Buffer Memory

4.1Mbit

Jumbo Frame

9K Bytes

VLAN

Port-based VLANs

4K-entry Vlan Table

VLANs based on IEEE 802.1q

Spanning Tree

Support Spanning Tree Protocol

Support Rapid Spanning Tree Protocol

Link Aggregation

Support 8 aggregation groups, and a maximum of 8 ports in each aggregation group

Static aggregation and LACP

Port Mirroring

Support bi-direction port mirroring

RSPAN function for remote mirroring

Port Isolation

Isolation between downlink ports without influence the communication between downlink and uplink ports

Port Flow Control

Back-pressure traffic control under Half-Duplex mode

IEEE 802.3x traffic control under Full-Duplex mode

Port Rate Restriction

Port-based ingress or egress rate limiting

DHCP

DHCP Snooping

IPv6

ICMP v6, Telnet v6

Storm Suppression

Support the suppression of broadcast storm based on forwarding rate

Multicast Control

Support IGMPv1/2/3 and MLDv1/2 Snooping;

Security

Attack Prevention(Land attack\Blat attck\Ping attack\TCP control flag attrck)

MAC & Port based Security

802.1X(dot.1x)

QOS

802.1p(Port Queuing Priority)

WRR (Weighted Round Robin)

Cos/Tos,QOS

PoE

PoE ouput priority Management

Physic Medium

10/100Base-TX:UTP category 3/4/5 cables( Maximum 100m)

1000Base-T:UTP Category 5 cable( Maximum 100m)

1000Base-SX:fiber with 850nm wavelength,supports a max transmission distance of 550m

1000Base-LX:fiber with 1310nm / 1550nm wavelength,supports a max transmission distance of 80km

Network Cable Deployment

Support Auto-MDIX function, automatically identify straight forward cable and cross-over cable

Negotiation Pattern

Support port auto-negotiation function( automatically negotiate transmission rate and Duplex modes)

Maintenance

Detect the connectivity of network cables

Uploading or downloading of the configuration data

Uploading of upgrade patch

Support system logs

WEB-based reset to factory defaults

Management

WEB-based management

CLI Management (Command Line Interface)

Telnet

SNMP

  Order Information

Product Information

Detailed information

S2528C-P-400W

24*10/100/1000 Base-T ports(POE/POE+),4*10/100/1000 Base-T ports, 4* 1000 Base-X SFP ports(Combo), IEEE 802.3af/at,Total Output Power: 400W.

Transceivers

SFP-GE-SX-MM850

1000BASE-SX SFP Transceiver, Multi-Mode (850nm, 550m, LC)

SFP-GE-LX-SM1310

1000BASE-LX SFP Transceiver, Single Mode (1310nm, 20km, LC)

SFP-GE-SC-1310

SFP Gigabit optical module, TX1310/RX1550 (20km, SC)

SFP-GE-SC-1550

SFP Gigabit optical module, TX1550/RX1310 (20km, SC)